Description

Aquario Neo Co2 DiffuserTiny Curved
The best just got better!

TheNeo Co2diffuser fromAquariofeatures microscopically small holes resulting in very fine and thorough bubble diffusion.

The microbubbles produced allow for better Co2 dissolution in your water column, effectively allowing aquatic plants to absorb Co2 properly.

Sleek and sturdy, theNeoDiffuser is made from transparent acrylic and is not easily broken when performing aquarium maintenance.

Unlike other diffusers, the Neo diffuser curved type will not be an eyesore!
Aquario Neo curvedversionscome already bent and can sitover the rim of your tank without the need for suction cups!

You can use the provided suction cups to secure your Co2 line to the outside of your tank.
Soak it in water for 30 minutes before use to produce smaller bubbles.

Product Features:

• Reduction of back-flow pressure
• Smaller bubble than existing products
• Hard-to-break, elastic PC (poly-carbonate) pipe
• Full improvement(angel, joint, length, diffusion area)

Available in1 size and 2 lengths
Tiny SS up to10 gallons (15cm) Glass up to8 mm
Tiny S up to10 gallons (23 cm) Glass up to8 mm

Length: SS : 15cm /S : 23cm
Width of clip: S&SS : 9mm

Larger diffusers can be usedin smaller tanks.

Meet the Aquario NeoCurved Co2 Diffuser Family.

Important Notes:

• The ideal working pressure is10-30 PSI(Higher pressure might damage the diffuser)
• Attach the diffuser to your regulator and slowly increase the pressure to your desired level to avoid damaging your diffuser.
• Soak it in slightly warm water(NOT BOILING)for 30 minutes before use to produce smaller bubbles.
• When bubbles begin getting larger, put it in a bleach solution (1 part bleach 10 part water) for 10 minutes and wash with water several times removing all the bleach inside before use.
• Aquario Neo curved diffuser isavailable in Co2(brown)and Air(white) versions.
  Make sure to purchase the right diffuser for the right job, you can not use Air diffuser for Co2 or vice versa.

  Your diffuser seal is broken? Leaking from sides?
  You can use a small amount of Thin Superglue (any thinCyanoacrylate glue) to fix the broken seal in seconds.

  DO NOTget the glue on the diffuser’s surface.
  Wear gloves and be extra cautious when using the glue, it will bound skin instantly!

  Made in Korea.